========================================== MCS99xx Windows Driver release history ========================================== Release Version: 2.0.1.0, Dated: 16th October 2012 ================================================================= - Added Windows 8 support. - Added the StnCoInst.ini file to determine the sorting rule of cascaded COM ports. - Modified the co installer to support sorting ports what are on more cards. Release Version: 2.0.0.4, Dated: 14th November 2011 ================================================================= - Removed Container ID provider from the Parallel port driver for the printer detach failed issue. Release Version: 2.0.0.2, Dated: 19th August 2011 ================================================================= - Done modifications in the serial port driver to resolve the System - Disable Enable With IO in the WHQL tests for System logo on Windows 7. - In the Parallel port driver also,added code to provide ContainerID for the IRP_MN_QUERY_ID for the Raw port we create, which is required from Win7 onwards. - Setup and Uninstall applications' version numbering changed so as to sync with the driver disk version number. - Drivers are self signed so that the customer can perorm the WHQL system tests with out a problem. Release Version: 2.0.0.1, Dated: 16th December 2010 ================================================================= - Added registy parameter "CreateRawPort" in service key to enable disable creation of Microsoft Rawport. (Bug: 728) - Modified the setup/un-install utility to fix installation issue with Vista/Win7 64-Bit OS (bug: 748) Release Version: 2.0.0.0, Dated: 5th October 2010 ================================================================= - Driver disk modified for WHQL certification. - Added co-installer which assigns least COM/LPT number to the primary chip ports and then the secondary chip ports. (i.e Fix given for APL_SNR; \\192.168.200.231\drivers\Saturn\WindowsDrivers\CustomDrivers\APL_SNR\Version_1.0.1.12) Release Version: 1.0.0.13, Dated: 20th Aug 2010 ============================================================== - Added registry parameter ("UsePCIeClockForBaudGeneration" in driver key) to select either PCIe clock or External clock for baud rate generation. - Added configurable parameters for DTR Polarity and DTROverLapTime; Refer ReadMe_DTRPolarity.txt available in this driver disk. - Win64 Self-Signed driver. Release Version: 1.0.0.12, Dated: 17th Aug 2010 ============================================================== - Made a work-around for Bug#688 in the parallel port driver. Release Version: 1.0.0.11, Dated: 13th Aug 2010 ============================================================== - To fix the COM/LPT port number assignment in Windows 7 OS in sequence according to the function number on the PCI bus, every single serial or Parallel port has been enumerated through MF. Release Version: 1.0.0.10, Dated: 19th May 2010 ============================================================== - Fixed the issue in Co-instlaller componant which is not functioning properly in non-english OS. Release Version: 1.0.0.9, Dated: 07th April 2010 ============================================================== - This is Windows-7 specific release,the Co-Installer is added. - As the windows 7 Os assigns the COM/LPT numbers not in sequence,the co installer will help the port numbers to be assigned properly. Release Version: 1.0.0.8, Dated: 16th December 2009 ================================================================= 1.Bug #493 ,regarding the Parallel port fail in CBFIFO mode after PC wake-up from hibernate is fixed. Release Version: 1.0.0.7, Dated: 13th November 2009 ================================================================= 1.Serial Port driver is modified as to avoid system crash which is observed in Vista OS. 2.Setup and Uninstall utilities are modified as to support Windows 7 OS. Release Version: 1.0.0.6, Dated: 4th November 2009 ================================================================ 1.Added ECP-SW support in this driver release.(ModeSelectd = 5) 2.Fixed the CB-FIFO printing issue (Bug 504). Release Version: 1.0.0.5, Dated: 29th October 2009 ================================================================ 1) The Parallel port by default will be put into the Software ECP mode not in Hardware ECP mode (Bug:279). 2) The Stand by issue with saturn Serial ports in Cascade mode resolved (Bug: 353). 3) Serial port enumeration with yellow mark in Cascade mode is resolved (Bug: 625). 4) Safe Removal icon in system tray is made disabled. Release Version: 1.0.0.4, Dated: 13th August 2009 =============================================================== 1) These drivers compatible with Windows 7 Os apart from Vista and XP. 2) Added manifest files to Setup and Uninstall utilities,and these utilities are modified to support Windows 7 OS. Release Version: 1.0.0.3, Dated: 17th June 2009 ============================================================= 1) Internal Loopback test is added in the MP utility. 2) Version has changed to Version_1.0.0.3 Release Version: 1.0.0.2, Dated: 1st May 2009 ============================================================= 1) Fix made for the following bugs: 504, 493, 507, 509 2) Version has changed to Version_1.0.0.2 For the issue, "ECOM modem is detecting as a serial mouse (Bug 507)", we made a work-arround in the serial driver to configure the baudrate closer to the modem baudrate, while enumerating the modem. As this specific modem is sending data at little higher baud (1280) than the supported baudrate (1200) while enumeration. Release Version: 1.0.0.1, Dated: 5th March 2009 ============================================================= 1) Fixed the Bugs 327, 328, 351, 361, 386, 390 2) Modified the driver strings. Bug:369 (change request from Apps) Release Version: 1.0.0.0, Dated: 19th Jan 2009 ============================================================= 1) Fixed the Bug:321 (Failed to report the Ink status in CBFIFO mode) 2) Fixed the Bug 319 (Remote wakeup fails in Dell Precision T5400 and Dell) 3) Added SetUp Utility 4) Disabled the MSI based interrupts in Windows Vista OS. 5) Changes are done in Setup, Uninstall and StnPorts.dll to support localization of strings that appear on the GUI. Now they can show different language strings in different language operating systems. These changes cover VISTA, XP 32 bit and 64 bit operating systems. Release Version: 0.0.0.6, Dated: 17th Dec 2008 ============================================================= 1) No modification regarding driver code with the previous release. 2) Previous release, Version_0.0.0.5, was not made with the proper builds for serial port driver in Vista environment. (Bug: 312) Release Version: 0.0.0.5, Dated: 5th Dec 2008 ============================================================= 1) Fix made for the Intex serial mouser issue - bugId:219 2) Released Mass Production Utility Release Version: 0.0.0.4, Dated: 22nd Sept 2008 ============================================================= 1) Added support for Serial Transmitter Shutdown 2) Added support to validate GPIO using parallel port interface Release Version: 0.0.0.3, Dated: 11th Sept 2008 ============================================================= 1) Fixed the Burn-In test issues (Bug 159 and 172) 2) Support to validate Remote wake-up featur with out port opening. (Bug 160) Release Version: 0.0.0.2, Dated: 18th Aug 2008 ============================================================= 1) Fixed the Remote wake-up issue (Bug 135 and 139) 2) Fixed the issue with file transfers using the RTS/CTS flow control enabled in HyperTerminal as well as in property sheet. (Bug129) 3)Support to validate Message Signaled Interrupt. (In Vista OS only) Release Version: 0.0.0.1, Dated: 11th July 2008 ============================================================= 1) Supports 9900, 9904, 9912, 9922 and 9950 PIDs only. 2) Supports Both Cascade and Non-Cascade modes. 3) Un-install utility is provided. ========================================== Driver pre-releases for FPGA validation. ========================================== Release Version: 1.0.0.5, Dated: 11th June 2008 ============================================================= 1) This driver supports both non-cascaded and cascaded mode of MCS9950 serial ports. 2) StarEx WHQL Driver binaries are used for both serial port and parallel port. 3) This Initial version of the driver doesn't have the setup and uninstall utilities.