//============================================================================== // ASIX AX88772/AX88772A/AX88772B Windows 10 driver // // This document describes the driver's configurable parameters. //============================================================================== 1. Speed & Duplex: Set the Ethernet link speed. -Auto Negotiation: Auto detect the Ethernet link speed -10 Mbps Half Duplex: Set the Ethernet works on 10HD -10 Mbps Full Duplex: Set the Ethernet works on 10FD -100 Mbps Half Duplex: Set the Ethernet works on 100HD -100 Mbps Full Duplex: Set the Ethernet works on 100FD 2. NetworkAddress : Allows user to set a MAC address of the device or use the device default address. 3. FlowControl: Configure flow control advertised capabilities -Disabled Disable flow control -TxEnabled Enable transmit flow control -RxEnabled Enable receive flow control -RxTxEnabled Enable transmit and receive flow control 4. WakeOnLinkChange: Wake up the computer when device detects Ehernet link Changed -Disabled Disable WakeOnLinkChange function -Enabled Enable WakeOnLinkChange function 5. Packet Priority & VLAN: Enable or disable the ability to insert the 802.1Q priority and VLAN tags into the transmit packets. -Packet Priority & VLAN Disabled Disable to insert the 802.1Q priority and VLAN tag -Packet Priority Enabled Only enable to insert the 802.1Q priority tag -VLAN Enabled Only enable to insert the 802.1Q VLAN tag -Packet Priority & VLAN Enabled Enable to insert the 802.1Q priority and VLAN tag 6. VLAN ID: If user set a valid VLAN ID, the driver inserts the VLAN tag with this VLAN ID into the transmit packets and device will filter the received packets. 7. WakeOnMagicPacket: Wake up the computer when device receives a Magic Packet -Disabled Disable WakeOnMagicPacket function -Enabled Enable WakeOnMagicPacket function 8. WakeOnPattern: Wake up the computer when device receives a packet that matches a specified pattern -Disabled Disable WakeOnPattern function -Enabled Enable WakeOnPattern function 9. SelectiveSuspend: Allows NDIS to suspend an idle AX88772B network adapter by transitioning the adapter to a low-power state -Disabled Disable SelectiveSuspend function -Enabled Enable SelectiveSuspend function 10. SSIdleTimeout: Selective suspend idle time-out in units of seconds 11. TCPChecksumOffloadV4: Enable or disable the device to calculate the TCP checksum of the transmit IPv4 packets and check the TCP checksum of the received IPv4 packets. -Disabled Disable the TCP Checksum Offload -TxEnabled Enable the TCP Checksum Offload for transmit packets -RxEnabled Enable the TCP Checksum Offload for received packets -RxTxEnabled Enable the TCP Checksum Offload for transmit and received packets 12. UDPChecksumOffloadV4: Enable or disable the device to calculate the UDP checksum of the transmit IPv4 packets and check the UDP checksum of the received IPv4 packets. -Disabled Disable the UDP Checksum Offload -TxEnabled Enable the UDP Checksum Offload for transmit packets -RxEnabled Enable the UDP Checksum Offload for received packets -RxTxEnabled Enable the UDP Checksum Offload for transmit and received packets 13. TCPChecksumOffloadV6: Enable or disable the device to calculate the TCP checksum of the transmit IPv6 packets and check the TCP checksum of the received IPv6 packets. -Disabled Disable the TCP Checksum Offload -TxEnabled Enable the TCP Checksum Offload for transmit packets -RxEnabled Enable the TCP Checksum Offload for received packets -RxTxEnabled Enable the TCP Checksum Offload for transmit and received packets 14. UDPChecksumOffloadV6: Enable or disable the device to calculate the UDP checksum of the transmit IPv6 packets and check the UDP checksum of the received IPv6 packets. -Disabled Disable the UDP Checksum Offload -TxEnabled Enable the UDP Checksum Offload for transmit packets -RxEnabled Enable the UDP Checksum Offload for received packets -RxTxEnabled Enable the UDP Checksum Offload for transmit and received packets 15. IPChecksumOffloadV4: Enable or disable the device to calculate the IP checksum of the transmit IPv4 packets and check the IP checksum of the received IPv4 packets. -Disabled Disable the IP Checksum Offload -TxEnabled Enable the IP Checksum Offload for transmit packets -RxEnabled Enable the IP Checksum Offload for received packets -RxTxEnabled Enable the IP Checksum Offload for transmit and received packets 16. ArpOffload: When enable this ability, the device will reply the ARP request packet when computer is suspending. This ability is activated only if WOL is enabled. -Disabled Disable ARP Offload -Enabled Enable ARP Offload 17. NSOffload: When enable this ability, the device will reply the neighbor solicitation packet when computer is suspending. This ability is activated only if WOL is enabled. -Disabled Disable NS Offload -Enabled Enable NS Offload 18. AutoDetach: Enable or disable AutoDetach ability. if AutoDetach is enabled, 3 seconds later after Ethernet cable was unpluged, the device will be detached from USB. -Disabled Disable AutoDetach -Enabled Enable AutoDetach -Use EEPROM Setting Disable or enable AutoDetach accoring to the EEPROM setting 19. MaskTimer: If wake up ability is enabled, the wake up function will delay this time to active. -0,4,8,12,16,20,24,28 seconds 20. WolLinkSpeed: Set the Ethernet link speed when device sleeps if wake up ability is enabled. -10 Mbps First The Ethernet link speed works on 10 Mbps first if available -Use EEPROM Setting Use EEPROM setting to set Ethernet link speed